OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0619

Alternative Fuel Control Module RAM/ROM Error

CARB treats gas-fuelled vehicles (CNG, LPG, also the gas mode of bi-fuel cars) like petrol cars up to model year 2018 and under an approved manufacturer plan afterwards. P0619 means the separate alternative fuel module reports an error in its working memory (RAM, read/write test) or program memory (ROM/flash, checksum) – one code for both, while the engine module uses P0604 and P0605. No manufacturer was found that uses the code; Roush's Ford propane systems report gas module failures as U0108 and the engine module's own memory errors as P0604/P0605. A module whose memory cannot be trusted will typically shut down gas operation: bi-fuel cars run on petrol, dedicated gas engines may not start. The usual remedies are reprogramming the gas module with a stable supply, then replacement.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 19

Possible causes

  • Interrupted or faulty programming of the gas module high
  • Voltage dips, supply, ground or corrosion medium
  • Internal hardware defect (memory chip) medium
  • Manufacturer software fault low

Symptoms

  • Check engine or gas system warning light
  • No gas operation, switch to petrol
  • Starting problems on dedicated gas engines
  • Possibly communication code U0108

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0619

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication