OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0618

Alternative Fuel Control Module KAM Error

CARB treats gas-fuelled vehicles (CNG, LPG, also the gas mode of bi-fuel cars) like petrol cars up to model year 2018 and under an approved manufacturer plan afterwards. P0618 is meant for vehicles with a separate control module for the alternative fuel: it reports an error in that module's keep alive memory, which holds learned values while the ignition is off and loses them when power is cut – the gas counterpart of P0603. No manufacturer was found that uses P0618 this way; Roush's Ford propane conversions, for example, report a failed gas module as U0108. One Chrysler bulletin lists 'P0618' with the title of P061B – apparently a typo, not a second meaning. Expect lost adaptations; bi-fuel cars may switch to petrol. Check supply, fuse and ground of the gas module first.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 18

Possible causes

  • Power interruption at the gas module (battery disconnected, fuse, loose contact) high
  • Poor supply, ground or corrosion at the module (underbody mounting) medium
  • Software or programming fault of the gas module medium
  • Internal memory defect low

Symptoms

  • Check engine or gas system warning light
  • Switch to petrol, gas mode blocked (bi-fuel)
  • Rough idle until values are relearned
  • Often no symptoms

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0618

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication