OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0613

TCM Processor

P0613 reports an internal processor or calculation fault in the transmission control module. It is usually set by the transmission module itself – the scan tool shows which module stored it; on some architectures the engine module reports it on the transmission module's behalf. The only manufacturer document found is Subaru's bulletin for the 2022 BRZ 2.4 L automatic: an internal plausibility check (a calculated gear ratio) set P0613 falsely in rare cases, and the fix was reprogramming the transmission module with improved self-diagnosis. Depending on the maker the transmission may go into limp mode with a fixed gear and harsh shifts. Check supply, ground and battery first, then look for a software update. The engine module's processor fault is P0606; an ECM/TCM mismatch is P0614.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 13

Possible causes

  • Transmission module software (self-diagnosis triggers falsely) high
  • Voltage dip, poor ground or supply at the transmission module medium
  • Interrupted or faulty programming medium
  • Internal hardware defect (moisture, overheating) low

Symptoms

  • Check engine light or transmission warning
  • Transmission limp mode (fixed gear, harsh shifts)
  • Implausible shifting
  • Often no noticeable symptoms (sporadic false report)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0613

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication