OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0610

Control Module Vehicle Options Error

The module checks its vehicle-specific configuration for completeness and validity: at Ford the vehicle identification block or as-built data with tyre circumference, axle ratio, transmission and options; at GM the programmed vehicle options. Ford 2012 sets P0610 when one or more fields of that block are configured wrongly, the Ford diesel checks continuously within 0.5 s; GM and Saab V6 engines set it in the first trip, also for incomplete programming. Typical triggers are a new or used module without correct configuration, an interrupted reprogramming, or changed tyres or axle without updating the data. Symptoms include wrong speedometer readings or shift points and missing functions such as cruise control. The fix is rewriting the configuration or VIN-specific programming with the manufacturer's tool; replace the module only if the code returns.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 10

Possible causes

  • Module not or wrongly configured after replacement (used part, missing as-built data) high
  • Interrupted or faulty reprogramming medium
  • Changed tyre size or axle ratio without updating the data medium
  • Internal memory fault of the module low

Symptoms

  • Check engine light (depending on maker and variant)
  • Wrong speedometer reading or shift points
  • Optional functions such as cruise control missing

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0610

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication