OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P060F

Internal Control Module Coolant Temperature Performance

Coolant temperature feeds the torque model of the engine (friction, cold start), which the level 2 monitoring of the electronic throttle concept recalculates. P060F means the module's internal cross-check of this value failed: the temperature used by the main software and the value captured or recalculated by the monitoring level or a second converter path do not agree. No manufacturer table available to us (GM 2004–2025, Ford 2012/2020–23/diesel 2023, Saab) describes P060F with thresholds, so this explanation follows the pattern of P060D/P060E and CARB's rationality requirement for the coolant temperature sensor. Expect a substitute temperature, a permanently running fan and possibly reduced power. Sensor faults themselves are P0115–P0119; if those are present, start there.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 0F

Possible causes

  • Internal module fault in a converter or processor path medium
  • Faulty module software (update available) medium
  • Loose contact at the coolant temperature sensor that jumps between samples low
  • Unstable supply voltage or poor ground at the module (weak battery, voltage spikes) low

Symptoms

  • Check engine light or service lamp
  • Possibly reduced power
  • Radiator fan runs constantly (substitute value)
  • Implausible temperature gauge

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P060F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication