OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P060E

Internal Control Module Throttle Position Performance

P060E is the throttle counterpart of P060D. The throttle body also has two position sensor tracks, and the module checks whether it can still detect a short between them: during an active test one track is influenced briefly, and the second processor (GM 'motor processor') confirms that the test actually ran. GM 2005 sets the code when track 2 exceeds 1.75 V during the test or no test activity is seen for 500 ms, GM 2006 at 2.05 V or 498 ms, each after two counts of about 155 ms, with the lamp in the first trip; GM Europe rates it type C with reduced power. Ford does not use P060E. The throttle opening is limited or set to its default position. External disagreement between the two tracks is P2135; circuit faults of single tracks are P0120–P0123 and P0220–P0223.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 0E

Possible causes

  • Short between the throttle sensor signal lines or moisture in the throttle connector high
  • Faulty throttle body (sensor) medium
  • Internal module fault (test circuit, second processor) medium
  • Faulty module software (update available) low

Symptoms

  • Reduced power
  • Check engine light (GM) or service lamp (GM Europe)
  • Hesitant or jerky throttle response
  • Cruise control not working

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P060E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication