OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P060C

Internal Control Module Main Processor Performance

P060C reports a fault in the main processor that actually runs the engine, found either by the monitoring processor (Ford 'quizzer', level 3) or by duplicate storage and recalculation (GM). Typical findings are corrupted RAM or ROM data, arithmetic unit errors, memory address violations, a wrong program sequence or internal supply or temperature out of range (Ford diesel: internal voltage outside 1.3–3.3 V, 5 s). GM's 2025 petrol table flags a torque compensation outside ±52.9 Nm for 475 ms and sets the code in the first trip. Reactions range from reduced power to engine shutdown. Software is the most common cause: GM (2022 full-size trucks and SUVs), VW (Tiguan 2021, with cruise control faults), Nissan and Mercedes (transmission module, E-Class hybrid) fixed it by reprogramming.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 0C

Possible causes

  • Faulty module software (update available) high
  • Unstable supply voltage or poor ground at the module (weak battery, voltage spikes) medium
  • Internal hardware defect (memory, processor) medium
  • Overheating or moisture in the module low

Symptoms

  • Check engine light on
  • Reduced power or limp mode
  • Driver assistance such as adaptive cruise unavailable
  • Rarely stalling or no start
  • Transmission limp mode if the transmission module is affected

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P060C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication