OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0607

Control Module Performance

P0607 is the general 'module not working correctly' code, used when no specific memory or processor part is named. Ford sets it for wrong instruction execution or too many processor resets in engine and transmission modules; the Ford diesel after five communication errors with its monitoring chip within 20 s (a complete loss of that link is P0600). GM introduced it in the engine module only recently: the 2025 tables evaluate the results of built-in self-tests and error-correction counters, with the lamp in the first trip. Resets can cause brief stumbling or stalling, and some systems switch to limp mode. Software updates fixed it on the Alfa Romeo Giulia 2.9 V6 and Ram 6.7 Cummins, so check bulletins first. The code alone does not say which module set it – the scan tool shows whether it is the engine, transmission, brake or body module.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 07

Possible causes

  • Faulty module software (update available) high
  • Internal module defect (processor, clock, monitoring chip) medium
  • Low voltage, voltage dips or a poor ground or supply at the module medium
  • Electrical interference, e.g. from a faulty alternator or ignition low

Symptoms

  • Check engine light on
  • Limp mode or reduced power
  • Brief stumbling or stalling (module reset)
  • Several implausible codes at once

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0607

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication