OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P05F9

Stop-Start Status Signal Circuit

A discrete stop-start status line tells the engine module (or another module) whether stop-start is active, inhibited or has just stopped the engine. On most current cars this status travels over CAN instead, so a hard-wired line and these codes are rare; no manufacturer document available to us uses P05F9–P05FB. CARB names stop-start as its example of an 'emissions neutral' reaction: a module that simply disables stop-start when a fault appears may report it without the check engine light, which is what Ford does for its stop-start codes. P05F9 is the general circuit fault or open line. The typical reaction is that stop-start is disabled; the driver-operated stop-start switch has its own codes.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / F9

Possible causes

  • Open status line or connector problem high
  • Sending module without supply or faulty medium
  • Wrong software or variant coding (stop-start set without hardware) low

Symptoms

  • Stop-start does not work
  • Stop-start indicator or message in the cluster
  • Check engine light only with some makers

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P05F9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication