OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P05F4

Exhaust Aftertreatment Power Relay Control Circuit Low

A power relay, switched by the engine module through an output driver, feeds aftertreatment consumers such as the DEF pump, tank and line heaters and possibly NOx sensors or the SCR module. CARB requires such outputs to be checked for circuit faults and function. P05F4 means the relay control circuit is shorted to ground or its voltage is too low. Ford's comparable heater relay check flags a current above 6 A with the driver on, within 5 s. No manufacturer document available to us uses this exact code; GM and Ford monitor the same function under their own codes. If the relay fails, heaters, pump and SCR control drop out and dosing stops.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / F4

Possible causes

  • Control line shorted to ground high
  • Corroded connector or relay socket medium
  • Harness damaged medium
  • Output driver in the engine module faulty low

Symptoms

  • Check engine light on
  • DEF/AdBlue warning, possibly countdown to no-restart
  • Follow-up codes for heaters, pump or NOx sensor supply

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P05F4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication