OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P05F2

Reductant Pump Supply Voltage Circuit Stuck Off

The electric supply pump in the diesel exhaust fluid (DEF, AdBlue) tank module builds the dosing pressure for the SCR catalyst. Its supply voltage is monitored separately from the pump control circuit (P208A ff); CARB requires SCR components and their outputs to be checked for circuit faults and function. P05F2 means the pump supply cannot be switched on: after the switch-on command no voltage or feedback appears at the pump branch, so no pressure builds up. Chrysler (FCA) lists this code among those that trigger the DEF inducement: a 'Service DEF System' warning, a countdown after 50 miles and no restart after 150 miles (P241D). Without supply the pump cannot build pressure, dosing stops and NOx rises; pressure or SCR efficiency codes may follow.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / F2

Possible causes

  • Relay does not pull in or fuse blown high
  • Open in the relay control or load circuit medium
  • Output driver in the engine module faulty low
  • Electronics of the tank module faulty (no feedback) low

Symptoms

  • Check engine light on
  • DEF/AdBlue warning, possibly countdown to no-restart
  • Follow-up codes for low DEF pressure or SCR efficiency

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P05F2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication