P05F0
Reductant Pump Supply Voltage Circuit High
The electric supply pump in the diesel exhaust fluid (DEF, AdBlue) tank module builds the dosing pressure for the SCR catalyst. Its supply voltage is monitored separately from the pump control circuit (P208A ff); CARB requires SCR components and their outputs to be checked for circuit faults and function. P05F0 means the supply voltage is too high, or voltage is present although the supply is switched off (short to battery). GM's 6.6 L diesel monitors this as P1044 (two trips); Ford flags pump voltage above 16 V or controller voltage above 19 V. No manufacturer document available to us uses this exact code; GM and Ford monitor the same function under their own codes. Without supply the pump cannot build pressure, dosing stops and NOx rises; pressure or SCR efficiency codes may follow.
Possible causes
- Pump supply shorted to battery positive in the harness high
- Overvoltage from the charging system or a jump start medium
- Moisture or corrosion causing leakage current in the connector medium
- Relay or driver does not switch off low
Symptoms
- Check engine light on
- DEF/AdBlue warning, possibly countdown to no-restart
- Follow-up codes for low DEF pressure or SCR efficiency
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P05F0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.