OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P05ED

Reductant Heater Control Module Supply Voltage

Some diesels use a separate control module or power stage for the DEF heaters in tank, pump and lines; without heating, frozen fluid cannot thaw in winter and dosing stays blocked. P05ED reports that this module's supply voltage is outside its allowed window – a blown main fuse, an open feed or ground, or system voltage too low or too high. Chrysler (FCA) lists this code among those that trigger the DEF inducement: a 'Service DEF System' warning, a countdown after 50 miles and no restart after 150 miles (P241D). Thresholds are not published; GM's L5P monitors the comparable heater supply under its own codes and flags a drop of more than 3 V below battery voltage while heating is requested. Start with fuse, feed, ground and battery or charging system.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / ED

Possible causes

  • Main fuse or feed wire to the heater module faulty, connector corroded (splash zone) high
  • Poor module ground medium
  • Weak battery or charging fault (system voltage too low or too high) medium
  • Heater control module faulty internally low

Symptoms

  • Check engine light on
  • DEF/AdBlue warning, possibly countdown to no-restart
  • In cold weather: DEF frozen, dosing blocked, further heater codes

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P05ED

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication