P05E7
Park Brake Sensor/Switch Circuit Intermittent/Erratic
The engine module reads the park brake status, directly or via another module, because strategies depend on it: a parked diesel filter regeneration only runs with the park brake applied (Navistar), idle shutdown and PTO logic use it, and Ford delays an automatic restart while the electric park brake moves. CARB requires such inputs to be monitored. The only documented user of this code family is Volvo Trucks: since OBD 2021 a second park brake sensor (about 0.5 V applied, 3.5 V released) must agree with the old switch; the engine module reports the fault. No passenger car maker uses it verifiably. P05E7 means the signal jumps briefly without being permanently low or high – changes without operation, while driving or too quickly in a row. The status is then discarded and regeneration or stop-start is blocked.
Possible causes
- Loose contact or corrosion at connector or splice high
- Chafed wire with intermittent short medium
- Switch bouncing or worn medium
- Module connector low
Symptoms
- Intermittent check engine or park brake warning
- Running parked regeneration aborts
- Stop-start occasionally blocked
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P05E7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.