P05E6
Park Brake Sensor/Switch Circuit Range/Performance
The engine module reads the park brake status, directly or via another module, because strategies depend on it: a parked diesel filter regeneration only runs with the park brake applied (Navistar), idle shutdown and PTO logic use it, and Ford delays an automatic restart while the electric park brake moves. CARB requires such inputs to be monitored. The only documented user of this code family is Volvo Trucks: since OBD 2021 a second park brake sensor (about 0.5 V applied, 3.5 V released) must agree with the old switch; the engine module reports the fault. No passenger car maker uses it verifiably. P05E6 is the one code of the family with a manufacturer description: at Volvo both signals must change together and agree; if they contradict each other or one changes late, the code sets. Volvo advises starting the diagnosis with the brake released.
Possible causes
- New pressure sensor and old switch report differently (switch point, delayed change) high
- Faulty diode in the switch circuit medium
- Low air pressure or leak in the spring brake circuit medium
- Switch or sensor sticking or faulty medium
Symptoms
- Check engine light or OBD warning (heavy-duty)
- Park brake warning in the cluster
- Parked regeneration cannot be started
- Stop-start or idle shutdown not working
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P05E6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.