OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P05DC

Brake Pedal Position Sensor B Circuit Range/Performance

Brake-by-wire and hybrid systems use a dual-channel pedal travel sensor; channel B runs opposite to A at Toyota (3.6–4.4 V at rest, falling when pressed), so a common fault of both channels shows up. It feeds brake assist and regenerative blending; CARB requires inputs used by other diagnoses to be monitored. A channel fault blocks the A/B correlation P05E0 and usually limits brake assist or regeneration. P05DC means channel B leaves its learned or permitted working range without a clear short – for example from a misadjusted or uncalibrated sensor or contact resistance. No admissible manufacturer document available to us gives thresholds for it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / DC

Possible causes

  • Pedal sensor misadjusted, misassembled or not calibrated high
  • Contact resistance on signal line B medium
  • Sensor worn internally medium
  • Brake module low

Symptoms

  • Brake or regeneration warning light
  • Check engine light
  • Regeneration or brake assist reduced, pedal feel changed

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P05DC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication