P05D7
Driver Mode Select Switch B Range/Performance
The driver mode select switch (tour, sport, eco, snow, off-road, towing) changes engine and transmission maps such as shift points, pedal map and cylinder deactivation, so CARB requires it to be monitored as an input. GM reads switch A as an eight-position resistor ladder in the body module and sets P05D1–P05D3 in its 2025 tables when a condition is present for 4 s within 5 s, type B with warning lamp after two trips. A fault blocks mode selection; the vehicle stays in its basic mode. No manufacturer document available to us uses codes for switch B (a second mode switch or second signal line); its monitoring is assumed to match switch A. P05D7 means its voltage lies between valid position windows or the position is implausible, like GM's dead-band check P05D3 for switch A.
Possible causes
- Contact resistance at the connector high
- Switch B worn or damp medium
- Ground offset low
Symptoms
- Mode via switch B not or wrongly taken over
- Check engine light possible
- Mode display jumping
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P05D7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.