P05C8
Economy Mode Switch Circuit Range/Performance
The economy mode switch selects a fuel-saving mode (flatter pedal map, earlier upshifts, sometimes reduced A/C). It is usually a resistor ladder with 5 V reference read by the engine module; CARB names a driver-selectable eco mode as an off-cycle technology whose use must be counted. GM reports the same switch with its own codes P159F/P15A0, type B with warning lamp after two trips; P05C7–P05CA appear in no manufacturer document available to us. P05C8 means the signal is in range but implausible – between valid ladder steps or permanently pressed; GM accepts a press only for 0.094–1.5 s.
Possible causes
- Switch stuck (permanently pressed) high
- Contact resistance or corrosion shifting the voltage step medium
- Software low
- Module input low
Symptoms
- Eco mode switching unintentionally or not at all
- Indicator flickering or off
- Usually no check engine light
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P05C8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.