OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P05C7

Economy Mode Switch Circuit Open

The economy-mode (ECO) switch input has an open circuit. The ECU cannot read whether the driver requested fuel-saving mode (changes throttle map, transmission shift points, climate strategy).

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / C7

Possible causes

  • Open in switch or harness high
  • Pin pushed back out of connector body low
  • Cracked solder joint inside the module or sensor low

Inspection / repair

  • Difficulty: easy
  • DIY: possible
  • Estimated cost: 60–250 €
  • Estimated time: 0.3–1.2 h
  • Component: economy mode switch
  • MIL / check engine light

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication