P05C2
Engine Coolant Pressure Sensor Circuit
An engine coolant pressure sensor (5 V reference, ratiometric signal) measures pressure in the cooling circuit; in a sealed circuit pressure rises with temperature, so deviations reveal leaks or a loose cap – described in Navistar and GE patents for commercial and rail engines. No manufacturer document available to us uses P05C2–P05C6 for passenger cars; CARB requires input components to be checked for circuit faults, range and plausibility. P05C2 is the general circuit fault – signal, reference or ground open, or no communication from a digital sensor. Leak detection is then unavailable.
Possible causes
- Connector corroded or loose, wire open (coolant and heat zone) high
- Sensor faulty internally medium
- 5 V reference disturbed low
- Module or software low
Symptoms
- Check engine light or warning (depending on the maker)
- Coolant pressure or leak warning unavailable
- Usually no change in driving
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P05C2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.