P05BE
Stop-Start Mode Switch Circuit Low
The stop-start off switch lets the driver disable automatic engine stop for the current drive. It is read directly or via another module over CAN – on Stellantis' 2025 Ram 1500 it sits in the electronic shifter module. CARB names a stop-start diagnosis as its example of an emission-neutral diagnosis, so no warning lamp is required; stop-start is usually just disabled. P05BE means the switch circuit voltage is too low – a signal or reference shorted to ground, or with a resistor ladder a voltage below the lowest valid step. No manufacturer document available to us uses this code.
Possible causes
- Signal line shorted to ground high
- Switch shorted internally (moisture, spilled drink) medium
- 5 V reference of the reading module pulled down low
- Module input low
Symptoms
- Stop-start cannot be switched off or stays disabled
- Switch indicator not working
- Usually no check engine light
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P05BE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.