OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P05BB

Restraints Deployed

After a crash the restraint control module tells the engine module that airbags or belt tensioners have fired; the engine module then cuts the fuel pump (Ford: until the ignition is cycled) and possibly the engine. Depending on the maker the message travels over CAN and/or a dedicated wire with a defined level or voltage drop. P05BB is an event code: the engine module received a valid deployment message. The fuel pump is cut, the engine may stop, doors are unlocked by other modules, and Ford's engine module freezes recorded data. After a crash the restraint module must be replaced; a used module with a stored crash can also cause it. No manufacturer document available to us uses this code; it is a safety function, not an emission-relevant monitor, so usually without warning lamp.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / BB

Possible causes

  • Real accident with airbag or belt tensioner deployment high
  • Deployment after a hard underbody hit (e.g. off-road) low
  • False message from wiring or module fault low
  • Used restraint module with stored crash fitted low

Symptoms

  • Engine stops or will not start (fuel cut-off)
  • Airbag warning light
  • Doors unlocked, fuel cut-off message

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P05BB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication