OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P05AA

Active Grille Air Shutter B Position Sensor Circuit Range/Performance

The active grille shutter (A = upper or only shutter, B = second) closes louvres to cut drag and speed warm-up and opens them for cooling; CARB names it as an off-cycle CO2 technology and requires its components to be monitored. A separately evaluated position sensor, as these titles assume, is described in Ford patents (Hall sensor on the motor or sensor on the linkage). No manufacturer document available to us uses this code: today the sensor sits inside the LIN actuator, whose faults appear as P059F/P05AE, P05A1/P05B0 or U0284/U0285. Without position feedback the shutter is usually driven open. P05AA (shutter B) means the signal is electrically valid but does not match the commanded position or learned travel – GM covers such deviations under P059F/P05AE instead.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / AA

Possible causes

  • Louvres blocked (ice, snow, debris, bent bracket) – sensor correct, position wrong high
  • Position sensor in the actuator drifting or worn medium
  • Basic setting not learned after replacement medium
  • Shaft or linkage between motor and louvres broken medium

Symptoms

  • Check engine light on
  • Shutter stays in one position (usually open) or does not react
  • Slightly higher consumption, longer warm-up in winter

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P05AA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication