P05A8
Active Grille Air Shutter A Supply Voltage Circuit High
An active grille shutter closes louvres in the grille to cut drag and speed warm-up and opens them for cooling; CARB names it as an off-cycle CO2 technology and treats the actuator as an output component. Smart actuators (Ford 3.0 L diesel, Toyota) check their own coil and supply and report over LIN; simpler ones (VW 1.8 T) have their own supply and a control line from the engine module. GM uses none of P05A2–P05A8. A fault usually only costs fuel and warm-up time. P05A8 means the actuator supply is too high – an overvoltage in the system or a short to another circuit; the actuator switches off for protection. No manufacturer document available to us uses this code. Ford monitors only undervoltage (P05A7). With P0563 check the alternator and regulator first.
Possible causes
- System overvoltage (regulator, jump start) medium
- Actuator faulty internally (measuring wrong) medium
- Supply shorted to another circuit low
Symptoms
- Check engine light on
- Shutter inoperative
- Possibly P0563 or further voltage codes
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P05A8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.