P05A7
Active Grille Air Shutter A Supply Voltage Circuit Low
An active grille shutter closes louvres in the grille to cut drag and speed warm-up and opens them for cooling; CARB names it as an off-cycle CO2 technology and treats the actuator as an output component. Smart actuators (Ford 3.0 L diesel, Toyota) check their own coil and supply and report over LIN; simpler ones (VW 1.8 T) have their own supply and a control line from the engine module. GM uses none of P05A2–P05A8. A fault usually only costs fuel and warm-up time. P05A7 means the supply is present but too low. Ford's 3.0 L diesel sets it at once when the actuator measures its internal supply below 6.9 V while system voltage is 9–16.26 V, from 5 s after start – pointing to a voltage drop in feed or ground or an internal actuator fault.
Possible causes
- Contact resistance in connector, wire or ground (corrosion) high
- Actuator faulty internally (measuring wrong) medium
- Weak battery or charging system low
Symptoms
- Check engine light on
- Shutter inoperative at times
- Possibly further voltage codes
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P05A7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.