OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P05A2

Active Grille Air Shutter A Control Circuit/Open

An active grille shutter closes louvres in the grille to cut drag and speed warm-up and opens them for cooling; CARB names it as an off-cycle CO2 technology and treats the actuator as an output component. Smart actuators (Ford 3.0 L diesel, Toyota) check their own coil and supply and report over LIN; simpler ones (VW 1.8 T) have their own supply and a control line from the engine module. GM uses none of P05A2–P05A8. A fault usually only costs fuel and warm-up time. P05A2 concerns the control or motor coil circuit. Ford's 3.0 L diesel reports an open and a shorted coil under it, checked by the actuator at the start and 500 ms after each movement, fault after 10 s. Toyota uses P05A2 as a collective code with a failure-type byte for short to ground, short to positive, open or stuck.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / A2

Possible causes

  • Actuator motor coil open or shorted high
  • Connector corroded or damaged (front bumper, splash water, stone chips) medium
  • Front harness damaged (accident, rodents) medium
  • Engine module low

Symptoms

  • Check engine light on
  • Shutter not moving (usually open)
  • Slightly higher consumption, longer warm-up

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P05A2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication