P05A1
Active Grille Air Shutter A Position Sensor Minimum/Maximum Stop Performance
The active grille shutter (A = upper or only shutter, B = second) closes louvres to cut drag and speed warm-up and opens them for cooling; CARB names it as an off-cycle CO2 technology and requires its components to be monitored. P05A1 checks whether the shutter reaches its end stops (fully closed and open), which serve as reference for the position sensor in the self-learning run. Ford's 3.0 L diesel sets it at deviations above 40° when learning closed, 20° when learning open or 20° in operation, after 10 s; a Ford patent detects the stop by stall current and requests recalibration. GM, Toyota and VW do not use it.
Possible causes
- Louvres not reaching the stop (ice, debris, bent louvres or bracket) high
- Actuator or gear weak, linkage worn medium
- Misassembled or not learned after replacement medium
- Position sensor in the actuator faulty low
Symptoms
- Check engine light (depending on the maker)
- Shutter not opening or closing fully
- Possibly higher engine temperature or consumption
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P05A1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.