P059A
Active Grille Air Shutter A Position Sensor Circuit
The active grille shutter (A = upper or only shutter, B = second) closes louvres to cut drag and speed warm-up and opens them for cooling; CARB names it as an off-cycle CO2 technology and requires its components to be monitored. A separately evaluated position sensor, as these titles assume, is described in Ford patents (Hall sensor on the motor or sensor on the linkage). No manufacturer document available to us uses this code: today the sensor sits inside the LIN actuator, whose faults appear as P059F/P05AE, P05A1/P05B0 or U0284/U0285. Without position feedback the shutter is usually driven open. P059A (shutter A) is the general circuit fault of the position sensor – signal missing or wire open, without low/high split.
Possible causes
- Position sensor in the actuator faulty (replaced as a unit) high
- Actuator connector corroded or with water ingress high
- Wire open in the front bumper harness (accident, rodents) medium
- Engine module or reference voltage low
Symptoms
- Check engine light on
- Shutter stays in one position (usually open) or does not react
- Slightly higher consumption, longer warm-up in winter
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P059A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.