OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0594

Cruise Control Servo Control Circuit/Open

Older engines without electronic throttle use a vacuum cruise servo on the throttle cable: a vacuum valve (closed when unpowered) opens the throttle with intake vacuum, a vent valve (open when unpowered) holds or releases it, and a dump valve fed through the brake switch vents it when braking. Where the engine module drives these valves, it checks each circuit and switches cruise off; CARB treats this as emission-neutral, usually without warning lamp. P0594 concerns the servo control or supply circuit: an open circuit. Where the servo is fed through the cruise contact of the brake light switch, braking interrupts this supply on purpose, so the brake switch and its wiring are typical causes and brake lights may be affected too. No manufacturer document available to us describes P0594 in detail.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / 94

Possible causes

  • Brake light switch (cruise contact) faulty or misadjusted high
  • Supply line open or shorted to ground medium
  • Servo connector or servo medium
  • Engine module output low

Symptoms

  • Cruise control cannot be engaged or switches off
  • Usually no check engine light, code stored only
  • Possibly brake light problem as well (shared switch)

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0594

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication