P0590
Cruise Control Multi-Function Input B Circuit Stuck
Cruise control buttons form a resistor ladder on one or two signal lines, each button giving its own voltage window. FCA uses two lines with offset windows – signal 1 is input A, signal 2 input B – and both must report the same button; GM evaluates the ratio to the reference. Any fault locks out cruise control; CARB treats this as emission-neutral, and GM and Ford set these codes without warning lamp. P0590 means input B reports a pressed button permanently – a button stuck or a voltage hanging in one window. No manufacturer document available to us uses P0590; FCA reports a stuck button with its own code P1593 or with P0585, and GM has no stuck code for input B. Counterpart of P0578 for input A.
Possible causes
- Button stuck mechanically (trim, dirt, spilled drink) high
- Short in the button block's resistor ladder medium
- Moisture or corrosion in the switch medium
- Module low
Symptoms
- Cruise control cannot be engaged, button noticeably sticking
- Cruise control locked out
- No check engine light
Inspection / repair
- Difficulty: easy
- DIY: shop recommended
What Pro shows you for P0590
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.