OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P058D

Battery Monitor Module Voltage Monitoring Performance

The battery monitor module (intelligent battery sensor) sits on the negative terminal of the 12 V battery: a shunt measures current, electronics also measure voltage and temperature and calculate state of charge, health and cranking ability, reporting over LIN. Energy management uses the data for alternator control, idle boost and stop-start release, which is why the engine module diagnoses it. GM sets P058A–P058F in its engine modules from 2016 as type B, warning lamp after two trips. P058D compares the module's voltage with the system voltage measured by the engine module itself: GM sets it above 5 V difference in 32 of 40 samples, its eAssist and stop-start engines at 2 V in 160 of 200. GM bulletins for the 2014–18 Malibu and Impala name loose terminals, ground faults and an overheating dual battery isolation module – with smoke or a burning smell.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / 8D

Possible causes

  • Loose or corroded terminal, ground ring or sensor connector high
  • Poor ground, loose splice, fault at the dual battery isolation module medium
  • Battery sensor faulty medium
  • Weak main or auxiliary battery low

Symptoms

  • Check engine light on
  • Stop-start inactive, battery or charge warning
  • Rarely burning smell in the engine bay (GM)

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P058D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication