P058B
Battery Monitor Module Current Monitoring Performance
The battery monitor module (intelligent battery sensor) sits on the negative terminal of the 12 V battery: a shunt measures current, electronics also measure voltage and temperature and calculate state of charge, health and cranking ability, reporting over LIN. Energy management uses the data for alternator control, idle boost and stop-start release, which is why the engine module diagnoses it. GM sets P058A–P058F in its engine modules from 2016 as type B, warning lamp after two trips. P058B concerns current measurement. In the sensor variant the module itself reports implausible current; GM's eAssist and stop-start engines compare it with their own reference and set it at 22 A difference in 160 of 200 samples. GM bulletins for the 2014–16 Malibu and Impala name a ground ring lying on the sensor's shunt or a loose terminal – current then bypasses the shunt.
Possible causes
- Ground ring touching the shunt or loose high
- Fretting corrosion in the sensor connector, loose ground splice medium
- Battery sensor faulty medium
- Retrofitted loads grounded directly at the negative post low
Symptoms
- Check engine light, often sporadic
- Stop-start inactive
- Wrong state of charge display or battery warning
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P058B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.