P0585
Cruise Control Multi-Function Input A/B Correlation
Cruise control buttons form a resistor ladder on one or two signal lines, each button giving its own voltage window. FCA uses two lines with offset windows – signal 1 is input A, signal 2 input B – and both must report the same button; GM evaluates the ratio to the reference. Any fault locks out cruise control; CARB treats this as emission-neutral, and GM and Ford set these codes without warning lamp. P0585 means inputs A and B contradict each other although both voltages are valid – one reports a button, the other rest or another button. Documented only by FCA: a 2022 bulletin traces it to a SET+ button stuck by a badly seated trim, another names oxidised steering wheel contacts. FCA gives no thresholds; GM does not use P0585.
Possible causes
- Button stuck mechanically (trim, dirt) high
- Increased contact resistance on one line (clockspring or column module connector) medium
- Button block faulty internally medium
- Clockspring faulty low
Symptoms
- Cruise control not engaging or cutting out, button sticking
- Cruise control locked out
- No check engine light
Inspection / repair
- Difficulty: easy
- DIY: shop recommended
What Pro shows you for P0585
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.