P0573
Brake Switch A Circuit High
Brake switch A is the brake light switch or its signal to the engine module. The module needs it to cancel cruise control and for brake-throttle override, stop-start, idle control and the shift interlock. As cruise control is simply switched off, CARB treats such faults as emission-neutral – usually without warning lamp. P0573 means the switch signal stays high – always pressed – although the car is not braking. Ford diesel checks over 40 accelerations, Ford petrol over 25 brake applications without warning lamp; GM in the Saab 9-4X compares the input with the body module, 8 of 10 samples over 2 s. Typical are a switch stuck closed, a pedal not fully returning or a short to positive. Cruise control is locked out.
Possible causes
- Brake light switch stuck closed or misadjusted (pedal stop buffer missing) high
- Brake pedal not returning fully (floor mat, return spring) medium
- Signal line shorted to positive medium
- Body or engine module low
Symptoms
- Brake lights permanently on
- Cruise control unusable
- Shift interlock disturbed
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0573
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBD-Operations-Summary-Gasoline-2020-2023.pdf
- saabwisonline.com/9-4x/2011/3-electrical-system/cruise-control-system/fault-diagnosis-diagnostic-trouble-codes/dtc-p0572-or-p0573
- saabwisonline.com/9-3-9440/2012/dtcs/e39/p0573-00