P056E
Cold Start Turbocharger/Supercharger Boost Control A Performance
CARB requires every element commanded by the cold-start strategy to respond measurably in the commanded direction, with its own codes separate from the general monitoring of the same part. During catalyst heating the boost control is positioned deliberately – diesels close the variable turbine for load and heat, petrol engines open the wastegate so heat reaches the catalyst. P056E means boost control A (the first or only charger) did not follow its cold-start target. Its only documented user is Stellantis: the 2025 Ram 3500 cab chassis with 6.7 L Cummins lists it among codes that can light the warning lamp, fixed by a PCM software update; customers noticed hard cold starts and raised cold idle. Ford and GM do not use it.
Possible causes
- Variable turbine or wastegate actuator stiff (coking, cold) high
- Module software or calibration medium
- Vacuum or boost hose leaking medium
- Position or boost sensor faulty low
Symptoms
- Check engine light on
- Hard cold start or rough warm-up
- Otherwise usually unremarkable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P056E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.