OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P056C

Cruise Control Cancel Signal

Cruise control buttons are almost always a resistor ladder on one or two signal lines, each button giving its own voltage; the module reading it (GM and Saab from about 2010: the body module; FCA: steering column module or PCM) sends the button state to the engine module over CAN. CARB names cruise control as the example of an emission-neutral diagnosis – it is simply switched off – so GM lists all these codes as type C and Ford as non-MIL: no warning lamp, the engine runs normally. P056C concerns the cancel button, which interrupts control but keeps the set speed – unlike the off signal P0566. GM (from about 2015) sets it when the button is reported pressed for over 20 s. Older code lists still show it as reserved.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / 6C

Possible causes

  • Cancel button stuck or faulty high
  • Moisture or wear in the steering wheel switch medium
  • Contact resistance in clockspring or steering wheel connector medium
  • Body module or cruise module low

Symptoms

  • Cruise control cannot be engaged or cancels immediately
  • Cruise control locked out
  • No check engine light, engine runs normally

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P056C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication