P056B
Cruise Control Decrease Distance Signal
Cruise control buttons are almost always a resistor ladder on one or two signal lines, each button giving its own voltage; the module reading it (GM and Saab from about 2010: the body module; FCA: steering column module or PCM) sends the button state to the engine module over CAN. CARB names cruise control as the example of an emission-neutral diagnosis – it is simply switched off – so GM lists all these codes as type C and Ford as non-MIL: no warning lamp, the engine runs normally. P056B exists only with adaptive cruise control: the button to decrease following distance is stuck or invalid; counterpart of P056A. FCA's switch reads the distance button over the same ladder as the others. No manufacturer document available to us uses this code.
Possible causes
- Distance button stuck or faulty high
- Moisture or wear in the steering wheel switch medium
- Contact resistance in clockspring or steering wheel connector medium
- Body module or cruise module low
Symptoms
- Following distance cannot be decreased
- Cruise control locked out
- No check engine light, engine runs normally
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P056B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.