P056A
Cruise Control Increase Distance Signal
Cruise control buttons are almost always a resistor ladder on one or two signal lines, each button giving its own voltage; the module reading it (GM and Saab from about 2010: the body module; FCA: steering column module or PCM) sends the button state to the engine module over CAN. CARB names cruise control as the example of an emission-neutral diagnosis – it is simply switched off – so GM lists all these codes as type C and Ford as non-MIL: no warning lamp, the engine runs normally. P056A exists only with adaptive cruise control: the button to increase following distance is stuck or invalid. FCA's switch reads the distance button over the same ladder as the others. No manufacturer document available to us uses this code. GM and Ford mostly report adaptive cruise faults in the radar module.
Possible causes
- Distance button stuck or faulty high
- Moisture or wear in the steering wheel switch medium
- Contact resistance in clockspring or steering wheel connector medium
- Body module or cruise module low
Symptoms
- Following distance cannot be increased
- Cruise control locked out
- No check engine light, engine runs normally
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P056A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.