P055E
Oxygen Sensor Control Module System Voltage
Some engines use wide-band or NOx sensors with their own evaluation module that reports over CAN. That module measures its supply; outside its working range it sets P055E, and lambda control and the sensor diagnoses are suspended because no valid values exist. No manufacturer document available to us uses P055E – Ford's diesel monitors the comparable supply of its smart NOx/O2 sensor as P220A/P220B, below 8.5 V or above 16.5 V. CARB requires modules delivering emission-relevant signals to be monitored.
Possible causes
- Fuse, relay or supply line to the sensor module high
- Poor module ground medium
- Battery or alternator (under- or overvoltage) medium
- Sensor module faulty low
Symptoms
- Check engine light on
- Lambda control in open loop, possibly higher consumption
- Further lambda or communication codes
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P055E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.