P055D
Engine Oil Pressure Sensor/Switch B High
Oil pressure sensor B is a second sensor, usually in the oil feed to the cam phasers or valve lift switching – on GM's 2.5 L (2014 Impala and Malibu) in the camshaft cover – while sensor A measures the main gallery. Documented only by GM (type B, two trips); Ford uses no sensor B. P055D means the signal is too high – a signal shorted to 5 V or battery voltage or an open sensor ground. GM sets it at a reading of 1000 kPa or more in 120 of 150 samples. Real excess oil pressure is reported separately, by Ford under P055F. The module uses a substitute value.
Possible causes
- Sensor ground open high
- Signal shorted to 5 V or 12 V medium
- Sensor B faulty internally medium
- Engine module low
Symptoms
- Check engine light on
- Cam phasing or valve lift switching possibly restricted
- Often no noticeable symptoms
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P055D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.