OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P055C

Engine Oil Pressure Sensor/Switch B Low

Oil pressure sensor B is a second sensor, usually in the oil feed to the cam phasers or valve lift switching – on GM's 2.5 L (2014 Impala and Malibu) in the camshaft cover – while sensor A measures the main gallery. Documented only by GM (type B, two trips); Ford uses no sensor B. P055C means the signal is too low – an open 5 V supply or signal line or a short to ground, not low oil pressure. GM sets it at a reading of 10 or less in 120 of 150 samples; real low pressure is P0524. The module uses a substitute value.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / 5C

Possible causes

  • 5 V supply or signal open, connector loose or corroded high
  • Signal shorted to ground (chafing) medium
  • Sensor B faulty internally medium
  • Module's 5 V reference disturbed low

Symptoms

  • Check engine light on
  • Cam phasing or valve lift switching possibly restricted
  • Often no noticeable symptoms

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P055C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication