OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P055B

Engine Oil Pressure Sensor/Switch B Range/Performance

Oil pressure sensor B is a second sensor, usually in the oil feed to the cam phasers or valve lift switching – on GM's 2.5 L (2014 Impala and Malibu) in the camshaft cover – while sensor A measures the main gallery. Documented only by GM (type B, two trips); Ford uses no sensor B. P055B compares sensors A and B with the phasers almost idle: GM sets it when they differ by more than 220 kPa below 1850 rpm, 80 of 100 samples. With the engine off, sensor B must read about atmospheric pressure (around 90 kPa); a GM bulletin for the 2014 2.5 L uses exactly that as a test. A real difference can also come from a clogged screen in the cylinder head feed.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / 5B

Possible causes

  • Sensor B drifting or stuck high
  • Sensor A wrong (comparison fails because of A) medium
  • Real pressure difference: clogged screen, oil level or quality medium
  • Contact resistance in the connector low

Symptoms

  • Check engine light on
  • Cam phasing or valve lift switching possibly restricted
  • Often no noticeable symptoms

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P055B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication