P055A
Engine Oil Pressure Sensor/Switch B Circuit
Oil pressure sensor B is a second sensor, usually in the oil feed to the cam phasers or valve lift switching – on GM's 2.5 L (2014 Impala and Malibu) in the camshaft cover – while sensor A measures the main gallery. Documented only by GM (type B, two trips); Ford uses no sensor B. P055A is the general circuit fault without low/high assignment. No manufacturer document available to us uses it – GM reports sensor B only as P055B–P055D. The module then uses a substitute value and may set cam phasers or valve lift to their base position.
Possible causes
- Connector or harness to sensor B open, corroded or oily high
- Sensor B open internally medium
- Shared 5 V reference or ground disturbed medium
- Engine module low
Symptoms
- Check engine light on
- Cam phasing or valve lift switching possibly restricted
- Often no noticeable symptoms
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P055A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.