P0559
Brake Booster Pressure Sensor Circuit Intermittent
The brake booster pressure sensor (5 V reference, signal, ground) measures the vacuum in the brake booster. On direct-injection, turbo, stop-start and hybrid engines intake vacuum is scarce, so the engine module watches it and creates vacuum when needed – closing the throttle, suppressing engine stop or running an electric vacuum pump. That makes it an input to idle and throttle control. P0559 means the signal jumps briefly – a loose contact or broken wire under movement – without staying out of range long enough for P0557 or P0558. No manufacturer document available to us uses it; GM catches dropouts through the sample counters of P0557/P0558. CARB requires input components to be checked for circuit faults.
Possible causes
- Loose contact at the sensor connector (pin tension, corrosion) high
- Broken or chafed wire moving with the engine medium
- Sensor with internal dropouts low
Symptoms
- Warning comes and goes
- Stop-start inactive at times
- Check engine light (depending on the maker)
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0559
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.