P0544
Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 1
The exhaust gas temperature sensor is a thermistor in a voltage divider with the module's pull-up resistor; the first one (sensor 1) sits before the turbocharger, the oxidation catalyst or after it depending on the maker. Diesels use it for particulate filter regeneration and component protection; CARB names it explicitly as a monitored input. P0544 is the general fault of bank 1 sensor 1. Ford's 6.7 L diesel uses it not as a circuit fault but for plausibility against an exhaust temperature model: after at least 6 h off it compares sensor and model over 200–400 s, a fault exceeding ±80 °C for 20 s, once per trip. GM's Duramax does not use P0544. The module then runs on a model value and may restrict filter regeneration.
Possible causes
- Sensor aged or drifting, soot on the tip high
- Cable or connector damaged by heat or vibration medium
- Exhaust leak before the sensor low
- Exhaust temperature really deviating (injection fault) low
Symptoms
- Check engine light on
- Particulate filter regeneration missing, filter warning
- Possible power reduction
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0544
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.