P053D
PCV Heater A Performance
The PCV heater is an electric element of a few ohms (Saab: 6–10 Ω) at the junction of the ventilation hose and the intake; it stops water in the blow-by gas from freezing and blocking the ventilation in frost. The module switches it to ground. P053D means the heater is electrically connected but its effect or current is implausible – current outside the target window, an overheated driver, or the expected warming does not occur. No manufacturer document available to us uses P053D; GM Europe checks this function under P052E. Frost protection is then uncertain.
Possible causes
- Heating element aged (resistance outside 6–10 Ω, Saab reference) high
- Increased contact resistance at the connector medium
- Partial short in the element (overcurrent, driver overheating) medium
- Engine module low
Symptoms
- Often none, except in frost
- Check engine light (depending on the maker)
- In frost: oil leaks or loss of power from frozen ventilation
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P053D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.