P053C
PCV Heater A Control Circuit High
The PCV heater is an electric element of a few ohms (Saab: 6–10 Ω) at the junction of the ventilation hose and the intake; it stops water in the blow-by gas from freezing and blocking the ventilation in frost. The module switches it to ground. P053C means the control line is shorted to positive: the driver cannot switch, the heater stays off, or the driver overloads and switches off. GM's diesels of 2016 check it with 20 of 40 samples below 90 °C coolant without warning lamp, GM Europe's 2.0 CDTI in the Saab 9-5 with the lamp on the first trip – a difference even within GM.
Possible causes
- Control line shorted to 12 V high
- Heating element shorted internally (very low resistance, overcurrent) medium
- Engine module low
Symptoms
- Often none, except in frost
- Check engine light (depending on the maker)
- In frost: oil leaks or loss of power from frozen ventilation
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P053C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.