P053A
PCV Heater A Control Circuit/Open
The PCV heater is an electric element of a few ohms (Saab: 6–10 Ω) at the junction of the ventilation hose and the intake; it stops water in the blow-by gas from freezing and blocking the ventilation in frost. The module switches it to ground. P053A means its control circuit is open. GM's diesels of 2016 check it with 20 of 40 samples below 90 °C coolant without warning lamp, GM Europe's 2.0 CDTI in the Saab 9-5 with the lamp on the first trip – a difference even within GM. The heater then has no effect, which only matters in hard frost.
Possible causes
- Heating element burnt out high
- Connector or wire open, corrosion high
- Fuse of the ignition supply blown medium
- Engine module low
Symptoms
- Often none, except in frost
- Check engine light (depending on the maker)
- In frost: oil leaks or loss of power from frozen ventilation
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P053A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG04 Engine Diagnostics.pdf
- saabwisonline.com/9-5-9650/2010/2-engine/engine-management-and-fuel-system-4-cyl-diesel/fault-diagnosis-diagnostic-trouble-codes/dtc-p052e-or-p053a-p053c
- static.nhtsa.gov/odi/tsbs/2018/MC-10137286-9999.pdf
- patents.google.com/patent/US10662836