P0539
A/C Evaporator Temperature Sensor Circuit Intermittent
The evaporator temperature sensor, an NTC thermistor behind the evaporator, prevents icing: near 0–3 °C the compressor is switched off or reduced. Usually the climate module reads it and reports body codes; P0535–P0539 only arise where the engine module controls the compressor and reads the sensor. P0539 means short dropouts or jumps in the signal that do not add up to a lasting low or high fault – usually a loose contact or condensate corrosion at the connector; the compressor may switch off at times. No manufacturer document available to us uses this code; the description follows CARB's input component rules.
Possible causes
- Loose contact or corrosion at the connector high
- Broken wire from movement or chafing medium
- Sensor with internal intermittent contact medium
Symptoms
- Air conditioning failing at times
- Cooling fluctuates
- Usually no check engine light
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0539
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.