P0536
A/C Evaporator Temperature Sensor Circuit Range/Performance
The evaporator temperature sensor, an NTC thermistor behind the evaporator, prevents icing: near 0–3 °C the compressor is switched off or reduced. Usually the climate module reads it and reports body codes; P0535–P0539 only arise where the engine module controls the compressor and reads the sensor. P0536 means the signal is valid but implausible – for example it differs from other temperature sensors after standstill, or does not drop after compressor engagement. Hella compares it with the cabin sensor with A/C off. Icing protection then works wrongly. No manufacturer document available to us uses this code; the description follows CARB's input component rules.
Possible causes
- Sensor drifting high
- Sensor not seated correctly in the evaporator medium
- Refrigerant shortage or compressor fault medium
- Contact resistance in the connector low
Symptoms
- Fluctuating or weak cooling
- Evaporator icing
- Compressor switching off too early
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0536
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.